Pond Vacuum II Parts

Foam Sleeve

The protective foam sleeve is placed around the internal float cage. It prevents large debris from entering the motor. If the foam sleeve becomes clogged you can simply wash with a garden hose....

Vacuum FLOAT w/ Magnet

The Vacuum Float slides up and down inside the internal cage which is attached to the bottom of the Vacuum motor. As the water level rises in the vacuum tank the float will rise and the magnet...

Vacuum O-Ring Seal

The O-ring seal attaches to the top of the vacuum body. It creates an air tight seal to maintain proper suction power. Older style vacuums have a seal which pushes up into the vacuum motor...

Vacuum Suction Hose

The Vacuum Suction Hose thread connects to the vacuum body. The handle end has a yellow ring and an air bleeder hole. Normal vacuuming should have the yellow ring in open position so as to slow...

Vacuum Drain Hose w/ Flapper

The Vacuum Drain Hose connects to the bottom of the Pond Vacuum body. We have two styles. Older versions simply push or compress into the drain outlet on body. Newer styles have a threaded...

Vacuum Clamp

The Vacuum Clamp connects the body to the vacuum motor head. They are easy to replace should one break. The Vacuum body has 4 clamps. You may purchase them separately. Vacuum Clamps are not...

Extension Tubes

The extension tubes are part of the intake pipe. The Pond Vac II comes with a set of 5 extension tubes. Each tube section is 15 inches long. The tubes interlock. You may add additional tubes if...

Vacuum Debris Collection Bag

The Debris Collection Bag attaches to the end of the drain out hose. This bags purpose is only to collect leaves or debris so it will be more convenient for you to clean up after you are done...

Pond Vacuum II Parts LIst

This is a parts list for the Matala Ponc vacuum II. If you need help finding something please contact us at info@MatalaUSA.com or call us at 949-273-8888.